|
| General |
Stud Size |
3/8 |
|
| Dimension Information |
E* (inches) |
(d) |
A (inches) |
.88 |
B (inches) |
1.50 |
C (inches) |
2.76 |
D (inches) |
1.06 |
|
| Specifications |
Circular Mil Area |
110,000 - 175,000 |
Rectangular Wire Range Thickness (inches) |
.175 - .250 |
Rectangular Wire Range Width (inches) |
.300 - .625 |
Round Wire Range AWG |
- |
|
| Tooling |
Tooling |
13100A, TBM15i |
Die Used |
13713B |
 Connector & Tooling Chart |
Click Here |
|
| Packaging |
Order Multiple |
25 |
Inner Package |
25 |
Outer Package |
250 |
Package Height |
12.75 |
Package Length |
10.5 |
Package Width |
10.25 |
T&B Sold in UOM |
Each |
T&B Weight Per UOM |
11.68 lbs. per 100 |
|
| Application Support |
 Product Selector |
Click Here |
 T&B Instruction Sheets |
ta02063-tb2 |
Overview |
Click Here |
|
| Notes |
*Note |
Reference dimension (crimped height). See installing die illustration for gauging. |
**Note |
Not recommended for aluminum magnet wire finer than 21 gauge or 0.4 mm². (a) Four wires max. (b) Six wires max. (c) Six wires max. each barrel (d) Conductors heavier than 6 AWG or 13 mm² require special dies. Contact Thomas & Betts for assistance. (e) Crimping dies may not bottom. Connector height will depend on number and size of wires in barrel. Pump must deliver 9800 psi minimum. |
- Wire sizes and combinations shown have been tested to and meet or exceed Thomas & Betts specifications. Connectors may be suitable for other wire sizes or combinations. Thomas & Betts sells these connectors with the understanding that the user will perform necessary tests to determine their suitability for the intended purpose.
|
|
| Certifications |
RoHS Compliance |
Yes (exemption 06) Generate Compliance Certificate |
